TrifectaTM GT

Surgical Valve
Replacement the
Gold Standard for
Aortic Valve Stenosis1

The TrifectaTM valve with Glide Technology (GT) is intended as a replacement for a diseased, damaged, or malfunctioning native or prosthetic aortic heart valve.

Surgical aortic valve replacement (SAVR)—for example, with the TrifectaTM valve—is the gold standard for the treatment of aortic stenosis.1

Bleak Prognosis Without Treatment

If symptomatic patients with aortic valve stenosis—who are already on medical therapy—do not undergo aortic valve replacement, mortality rates are approximately 25% at 1 year and 50% at 2 years. Aortic valve replacement is the only definitive treatment for such patients.2

Priorities When Selecting SAVR

When selecting a SAVR valve, physicians are encouraged to consider:

  • Hemodynamic performance
  • Rate of prosthetic-patient mismatch

AP2947046-WBU Rev. A

  1. Bonow RO, et al. Management strategies and future challenges for aortic valve disease. Lancet. 2016;387:1312–1323.
  2. Ren X. Aortic stenosis. MedScape. Published March 23, 2017.
Important safety information


The TrifectaTM Valve with GlideTM Technology is intended as a replacement for a diseased, damaged, or malfunctioning native or prosthetic aortic heart valve.


None known.


  • For single use only. Do not reuse or resterilize. Attempts to resterilize the valve may result in valve malfunction, inadequate sterilization, or patient harm.
  • Do not oversize. Valve size selection is based on the size of the recipient annulus and the anatomy of the sinotubular junction. If the native annulus measurement falls between the two valve sizes, use the smaller size valve. Use only the Model TF2000 TrifectTM Sizers for sizing the valve. Implantation of an oversized valve may result in stent deformation, valvular incompetence, valve damage, diminished tissue durability, and/or damage to the surrounding tissues.
  • Passage of a diagnostic catheter or transvenous pacing lead through any bioprosthesis may damage the valve and is therefore not recommended.
  • Accelerated deterioration of the valve may occur in:
    • Children, adolescents, or young adults
    • Patients with altered calcium metabolism (e.g., patients with hyperparathyroidism or chronic renal failure)
    • Individuals requiring hemodialysis
  • Do not use if:
    • The valve has been dropped, damaged, or mishandled in any way, or if there is any sign of deterioration.
    • The expiration date has elapsed.
    • The tamper-evident jar seal is damaged, broken, or missing or if fluid is leaking from the packaging.
    • The storage solution does not completely cover the valve.
  • Use only the TrifectaTM Model TF2000 sizers1 for sizing the valve.
  • The titanium valve stent is not designed as a flexible stent. Do not bend the titanium valve stent. Deformation of the stent may impair valve function.


  • Safety and effectiveness of the valve has not been established for the following specific populations:
    • Patients who are pregnant
    • Nursing mothers
    • Patients with chronic renal failure
    • Patients with aneurysmal aortic degenerative conditions (e.g., cystic medial necrosis, Marfan’s syndrome)
    • Patients with chronic endocarditis
    • Patients requiring pulmonic or tricuspid valve replacement
    • Children, adolescents, or young adults
  • Sizer sets are supplied non-sterile, and must be cleaned and sterilized prior to each use. Do not use cracked, crazed, or deformed sizer set components.
  • Do not place the non-sterile exterior of the valve jar in the ssterile field.
  • Do not use the valve if shipping temperature indicators on the product carton have turned red, or if the valve has been improperly stored in temperature conditions outside of the 5°C–25°C (41°F–77°F) range.
  • Do not expose the valve to solutions other than the formaldehyde solution in which it was shipped,  the sterile isotonic saline solution used during the rinsing procedure, or the sterile isotonic saline  used to irrigate the valve.
  • Do not add antibiotics to either the valve storage solution or the rinse solution.
  • Do not apply antibiotics to the valve.
  • Do not allow the valve tissue to dry. Place the valve in isotonic sterile saline rinse solution immediately upon removal from the valve storage solution. Once removed from this solution, the valve should be periodically irrigated during implantation.
  • Do not implant the valve without thoroughly rinsing as directed.
  • Position the valve so that the stent posts do not obstruct the coronary ostia or come in direct contact with the aortic wall.
  • Never handle the leaflet tissue.
  • Avoid prolonged contact with the formaldehyde storage solution. Immediately after contact,  thoroughly flush any skin exposed to the solution with water. In case of contact with eyes with water and seek appropriate medical care.
  • Use caution when placing sutures through the  sewing cuff to void lacerating the valve tissue.  If a valve is damaged, the valve must be replaced.
  • Do not use cutting edge needles, unprotected forceps, or sharp instruments, as they may cause structural damage to the valve.
  • Do not attempt to repair a valve. Damaged valves must not be used.
  • Do not pass the replica end of the TF2000 sizer through the annulus when sizing the valve.
  • Use caution when tying knots to avoid bending  the stent posts.


The TrifectaTM Valve with GlideTM Technology is based upon the TrifectaTM Valve design. Therefore, a previous clinical investigation of the TrifectaTM Valve supports the safety of the TrifectaTM Valve with GlideTM Technology. Between June 2007 and November 2009, one thousand and twenty-two (1022) subjects were implanted with the Trifecta valve in the aortic position at 31 investigational sites in the United States (18), Canada (7), and Europe (6). Data are presented on the one thousand and fourteen (1014) subjects who met eligibility criteria. The cumulative follow-up for all subjects was 924.18 patient-years with a mean follow-up of 0.91 years (SD = 0.49 years, range 0 - 2.38 years).

Adverse events potentially associated with the use of bioprosthetic heart valves include:

  • angina
  • cardiac arrhythmias
  • endocarditis
  • heart failure
  • hemolysis
  • hemolytic anemia 
  • hemorrhage
  • leak, transvalvular or paravalvular
  • myocardial infarction
  • nonstructural dysfunction (entrapment by pannus or suture, inappropriate sizing or positioning, or other)
  • prosthesis regurgitation
  • stroke
  • structural deterioration (calcification, leaflet tear, or other)
  • thromboembolism
  • valve thrombosis

It is possible that these complications could lead to:

  • reoperation
  • explantation
  • permanent disability
  • death

See the Clinical Study section of these instructions for adverse event data collected in the TrifectaTM Valve clinical investigation.

1. TF2000 sizers are included in sizer set models TF2000 and TF2000-2.

This site uses cookies to improve your experience.

To find out more please read our Privacy and Cookies policy.



Receive updates from Abbott Structural Heart


You are now leaving Abbott is not responsible for any content published on the third-party website you are about to enter. Abbott has not reviewed and does not endorse any information presented on third-party websites.